Stand with feet shoulder width apart and your shoulders square to the target. Be aware that some crossbows you’ll need to hear two clicks before the bow is cocked. On most crossbows, you’ll hear an audible “click” when the string is fully cocked. Continue to pull the string until it’s beneath the arrow-retention spring and the string latches into place, engaging the safety.Įnsure the safety is fully engaged in the “on” or “safe” position, indicating the crossbow is properly cocked. Stand up while pulling the string upward. Keep your thumbs on the side of the rail to help center the string while cocking the crossbow. With a hand on each rail, hook the string with the index, middle and ring fingers. Set your cocking device per the manufacturer’s instructions. If you aren’t using a device, simply reach down with both hands and grasp the string. Place your foot securely into the stirrup. Please refer to your manufacturer’s instructions for specific procedures pertaining to your crossbow. These are general steps for loading and firing a crossbow. Before loading a bolt into a crossbow, make sure the safety is fully engaged in the “on” or “safe” position. The crossbow’s unique design allows for great accuracy, which is important for bowhunting. The trigger also has a safety that prevents accidental misfires. Trigger – Crossbows have a trigger mechanism, which releases the latch that holds the bowstring. This is where the arrow sits and the bowstring slides across. Rail – The top of the foregrip is called the rail. Compound crossbows have a pulley system, called cams, at the end of the limbs.īowstring – The bowstring connects both limbs and transfers the bow’s energy to the bolt. They flex and store energy to propel the bolt. Limbs – The limbs provide the bow’s power. The rear of the stock that rests against your shoulder is called the buttstock. The front of the stock where you grip the bow is called the foregrip. All other parts of the crossbow are attached to the stock. Stock – A stock is considered the body of the crossbow. Place your foot inside the stirrup to secure the crossbow during cocking. Stirrup – A metal frame located at the front of the crossbow. The archer uses his right shoulder to support the crossbow’s buttstock. His right (dominant) hand is safely placed on the grip, with his finger off the trigger until he’s ready to shoot. In this photo, the archer’s left (non-dominant) hand is on the foregrip and below the crossbow’s rail. Enhanced aiming, of course, helps ensure proper shot placement, enabling you to take advantage of coveted shot opportunities while bowhunting. You can also use bipods, tripods and shooting sticks to get a rock steady aim.Ī telescopic scope can further improve your accuracy because it helps you take precision aim even at far-away targets. Both hands and the shoulder support the crossbow, giving you a steadier aim, whether in a treestand or ground blind. Crossbows, on the other hand, are fired from a shouldered position. Standard bows are held with one hand on the grip and one hand on the bowstring. Also, accuracy improves because you don’t have to struggle against the bow’s weight when aiming. This feature, called the cocked position, makes crossbows an excellent option for archers with injuries. A crossbow is different – the bowstring is locked and held in place by a mechanical latch rather than physical strength. With a typical recurve or compound bow, the archer pulls the bowstring and holds it in place, either with their fingers or a release aid.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |